316L SS Oct Core Fused Clapton, Eight parallel small gauge core wires with a clapton overwrap. Increasing multiple small cores increases surface area while maintaining quick ramp and cooldown. This is a very high performance wire that falls somewhere between the 30g hex core wire and a staple. This coil's eight side-by-side cores gives the wire a much wider appearance and improved performance characteristics over a smaller number of larger cores as in a fused clapton or as in a single core clapton wire. We recommend selecting 3.5mm - 4mm and 5-6 wraps to fit most newer RDA's that are 24mm or more. For most 24mm RTA's we recommend 3mm diameter for wicking purposes.
|Wraps / Inner Diameter||3.0mm ID||3.5mm ID||4.0mm ID|
NOTE: These resistances are approximations only and are given as single-coil builds. To determine the resistance of a dual coil build, divide the given ohms in half.
Post holes must be able to fit large wire, this is slightly wider than framed staple. This is one of the most advanced wires we offer. If you're inexperienced with ss or rebuilding we ask that you please purchase a different wire. This is an intense coil at the peak of its performance.
**THIS IS AN ADVANCED ITEM THAT REQUIRES A GOOD UNDERSTANDING OF BATTERY SAFETY AND OHMS. WE RECOMMEND ONLY FOR USE ON A REGULATED MOD, MECHANICAL MODS ALSO WORK BUT CAN BE DANGEROUS IF DONE INCORRECTLY!
Great wire fast shipping
This wire provides great flavor and I can blow some insanely massive clouds in my large 28mm+ dual coil attys. Running 4mm 5 wraps which has a really quick ramp up and cool down -- my top cap and drip tip never gets burning hot with these big beefy (and aesthetically pleasing) coils. It's a bit springy so I use a 3.5mm jig to make 4mm coils. Thank you very much AVS!
This is by far THE BEST wire for wax RDA's. It'll slurp it all up and deliver it all to you with little to no reclaim.
Still am a big fan on the hex core but this new oct core takes it to another level. Tricky but not impossible for dual coil builds, I build mine at 4mm ID with as many wraps as I can fit. Usually end up at 0.10 to 0.17 ohms in my 28 to 30mm tanks. Not a wire for smaller dual coil tanks but excellent in single coil tanks. I didn't think it could get much better than the hex core but AVS has dine it again!
We're experiencing technical difficulties
Our payment gateway is down and we cannot accept payments at this time but you're welcome to come in and browse around. We're working diligently to solve the problem.