The Bubbler is a nice add on for the Molecule dab RDA. There is one issue and that is if the bubbler is attached to the Molecule on a light mod wit a narrow base it will be prone to tipping over and that is not good with all the fragile glass. I originally felt I would use the bubbler/molecule combo on an old Evic Mini but that was a disaster as it would not remain upright. I ultimately mounted the combo on my heavy four 18650 SteamCrave Titan mod and it is a perfect combo. However as the Titan is a voltage only mod I lack the benefit of temp control. I found that setting the voltage at 3.7 volts I could achieve a satisfactory slow ramp up with the coil and it has given the type vape I desired. I would recommend this combination for anyone seeking a reasonable priced kit to us with a suitable mod. The bubbler significantly reduces harsh vape that one gets using the Molecule dab RDA alone.
Easy to clean, easy to use.
Tried many setups with different water attachments before. What really makes this set up special is the molecule base. With how hard the molecule rda can hit I knew a water attachment would be ideal. Low and behold this fine company did just that and works as well as a torch and bucket rig and easier for portability. Only con so far is the green orings are a bit smaller in diameter than the included black ones. The base of the rig that connects to the attachment to the molecule rda was a little loose so I switched the orings out and it fits better but still a little loose. Since the rig is a little heavy it wants to lean to one side so the oring tolerances are important. Using this on a rx200 mod by wismec.
316L SS Fused Clapton, this variation is 2x 28g cores with a 34g outer wrap. This is a thirsty coil/wire that will billow huge clouds...View full product details