$ 1.49 $ 12.99
PLEASE NOTE: This is 430 SS and not 316L, you will need to use a custom CSV or mod with adjustable TCR settings for use in TC.
This grade of SS does not contain Nickel. Additionally due to the higher TCR it works in TC more accurately! Please have a good understanding of SS before using this wire as it takes more knowledge and experience to work with then 316L. If you are new to SS or TC please use 316L first.
**THIS IS AN ADVANCED ITEM THAT REQUIRES A GOOD UNDERSTANDING OF BATTERY SAFETY AND OHMS. WE RECOMMEND ONLY FOR USE ON A REGULATED MOD, MECHANICAL MODS ALSO WORK BUT CAN BE DANGEROUS IF DONE INCORRECTLY!
If you have any questions please don't hesitate to email firstname.lastname@example.org
Was going to use them for my mech Mod, but a 5 wrap around a 2.5 mm was really slow ramp up, and a 4 wrap around a 2.5 mm jig or even a 3mm jig was too low of a resistence for my comfort(.06,.07)
have to get used to the ohm-settling times, but nice flavourful vape with smooth ramp up and temperature consistency.
So, normally I don't do the whole review thing; unless something is Awesome or if it's Awful. In this case, it's awesome! Having only recently started messing with building coils I figured it would be good to have some premade stuff since I'm not at the point where I can consistently put out good wraps. The TC accuracy is pretty great, as is the flavor. I haven't had a problem with popping or spit back like the other review, so maybe there's another variable... For the price, you probably couldn't even build these yourself. I prefer spools to premade coils so I have control of the resistance and coil structure. I'm not doing anything fancy but it's nice to be able to size coils up or down to fit your deck. TL;DR-- Buy this.
I really like these. They have a clean taste and work very well in power mode. They also seem to last longer than 316l, which turns brown quickly. These will, too, eventually, but I’ve kept them running nearly as long as a set of n80 (tho not n90). Better yet, they have a much higher temp coefficient than other SS wire. They’re very accurate in temp control when set up properly. No more stainless steel wire only really being accurate with a DNA-level chip! Even on a DNA you can really feel the difference over 316l. The one drawback, and it’s a notable one... AVS so far only sells them with crazy-thick 30g outer wraps. There’s no advantage to that, only drawbacks. It’s a lot of metal for the cores to try and heat. These ramp up slowly unless you put stupid power thru them, and thus they aren’t adding to the flavor as much as they could, except maybe at the end of a long draw. (What’s maybe a worse effect of the gauge,) they cool down even slower. That’s all wasted energy. These aren’t energy efficient. They can tend to pop, too bc of it. This can be remedied but you have to get the hang of how to build/space/place them. It takes more words to explain that downside than it really deserves. It’s a problem, but a moderate one. Definitely still try these, especially if either you like other SS alloys or couldn’t get them to run in tc satisfactorily.